YOUSU PLA filament 3d printing pen ID-161 PLA filament 3d pen

1.3d printing pen easy to operate with the clear functions illustration;

2.Won’t be plugged easily due to reasonable design;

3.Easy to change filament, needn’t to turn off frequently;

4.Unloading and turning off automatically without operation for 8 minutes;

5. Ceramic pen head, preventing to be hurt due to the hot head;

Professional R&D team

We are pride of professional and passionate R&D team. Because their hard working of formula.Meanwhile,we have got more than 20+ patents,and 3 invent patents. Besides,quality control since raw material,production and package are the key for us keep supplying good quality products as well.

Instruction and Attention

It shall be sealed and kept away from light at normal temperature, avoid high temperature or sunlight. 

Recommend use temperature: between 18-35 *c,if the temperature too low,the print effect maybe affected.The resin can be properly preheated before use (No more than 60 *C)

In case of settlement of resin pigment,it can be used after mixing and shaking. 

In order to ensure the idea performance of the curing material,it is necessary to control the intensity and time of the light source after curing,so it's recommended that:

•   1. The intensity of mercury lamp or LED light source is 5-10mW/m2, and the duration is not more than 1 hour, (self control)
•  2. The duration of exposure under the sun (summer) should be controlled about 1 hour.
•  3. it's forbidden to expose in close distance or for long time under strong light source,such as high-power,high pressure mercury lamp.
•  4. The resin is sensitive,so it's recommended to print in a dark condition, such as dark cabin or cover it when printing.
•  
• PS. The material performance will be vary,due to different molding  equipment, post curing method and testing equipment. Please refer to the MSDS of this product for safety information. If you encounter any problem when use,please feel free to contact us.
  
•