YOUSU 3D water washable resin Blue Gray 3d resin for LCD 8k 12k printer 405nm resin

Water washable resin meets requirement of general resin for material performance,and the rigidity,toughness,

hardness,detail performance are relatively balance.It's allow user quickly enter into the 3d printing world.

Professional R&D team

We are pride of professional and passionate R&D team. Because their hard working of formula.Meanwhile,we have got more than 20+ patents,and 3 invent patents. Besides,this water washable resin quality control since raw material,production and package are the key for us keep supplying good quality products as well.

Instruction and Attention

It shall be sealed and kept away from light at normal temperature, avoid high temperature or sunlight. 

Recommend use temperature: between 18-35 *c,if the temperature too low,the print effect maybe affected.The resin can be properly preheated before use (No more than 60 *C)

In case of settlement of resin pigment,it can be used after mixing and shaking. 

In order to ensure the idea performance of the curing material,it is necessary to control the intensity and time of the light source after curing,so it's recommended that:

•   1. The intensity of mercury lamp or LED light source is 5-10mW/m2, and the duration is not more than 1 hour, (self control)
•  2. The duration of exposure under the sun (summer) should be controlled about 1 hour.
•  3. it's forbidden to expose in close distance or for long time under strong light source,such as high-power,high pressure mercury lamp.
•  4. The resin is sensitive,so it's recommended to print in a dark condition, such as dark cabin or cover it when printing.
•  
• PS. The material performance will be vary,due to different molding  equipment, post curing method and testing equipment. Please refer to the MSDS of this product for safety information. If you encounter any problem when use,please feel free to contact us.
  
•